Click on the image to check the artwork
Product Type: PPR Welding machine 63mm
Item: THJ-63A
Heating Mold: Electric temperature controller
Supply Type: “Aquaman” Brand or OEM
Color: Green, Red, Blue and customized
Guarantee: 1 year Warranty and Spare parts factory cost
MOQ: As Agreement
Fusion Instruction:
1,Fix up a proper heating sockets. Tighten it with an inside turret according to the type of pipes needed, In general, the smaller sockets in the front while the bigger back.
2,Switch on the electricity to make sure the red light is on, Showing that the welding machine
goes into the state of auto-control of temperature and then operate it.
3, Cut off your pipe and put it with its fittings into the welding sockets,
operate as the table below shows. When the heating time is up, take
down from the sockets both the pipe and its fittings and straightly
insert to the depth needed so that a flange can be seen as the joint.
APP: If the temperature is below 5 , please heat it at extra 5%
Fusing Standards:
Diameter (mm) |
Welding depth (mm) |
Heating time (s) |
Processing time (s) |
Cooling time (min) |
20 |
14 |
5 |
4 |
3 |
25 |
16 |
7 |
4 |
3 |
32 |
20 |
8 |
4 |
4 |
40 |
21 |
12 |
6 |
4 |
50 |
22.5 |
18 |
6 |
5 |
63 |
24 |
24 |
6 |
6 |
http://www.china-pipetech.com/